GELEE® GELEE HYDRAULICS /fGL591 低温钢丝缠绕液压橡胶软管 IPER LOW TEMPERATURE RESISTANT WIRE 'IRAL HYDRAULIC RUBBER HOSE 途: 用于超低温下使用的石油基液压油，温度使用范 -55^-100^ 性: 管由耐超低温性特好的，具有良好耐油性的特种 合橡胶内胶，钢丝编织增强层，耐超低温性特好 且具有良好耐天候性的特种复合橡胶外胶组成。 PLICATIONS: For delivery of petroleum base draulic oil within a temperature range of 一55匕一 OX} ATURE: This hose consist of an inner tube made of \i temperature resistant and oil resistant special )ber compound, a wire spiral reinforcement and a se cover made of low temperature resistant and oil distant special rubber compound.

大口径钢丝缠绕橡胶软管 LARGE SIZE WIRE SPIRAL HYDRAULIC RUBBER HOSE 结构： 胶管由内胶层、钢丝缠绕层和外胶层组成。 特性. 适用于输送液压流体如醇、液压油、燃油、润滑油、乳 化油。软管执行美国API, ISO6807标准。工作温度-40匕~ 100匕(-40°F ~+212°F)。 CONSTRUCTION: This hose shall consist of an inner tube of oil resistant synthetic rubber, multiple 1 spiral plies of steel wire wrapped in alternating directions, and an oil and weather resistant synthetic " rubber cover. FEATURE: This section covers hose for use with alcohols, hydraulic oil, fuel oil, lubrication oil, emulsified liquids, etc. The hose is made in conformity with API standard and ISO 6807

GL589 SAE 100R15 理高脉冲多层钢丝增强橡胶软管 WY DUTY HIGH IMPULSE MUTIPLE SPIRAL STEEL WIRE NFORCED HYDRAULIC RUBBER HOSE 于使用石油基液压油，温度范围-40匕 !1匕(-40°F~+250°F)的软管。 ■. 由一层耐油合成橡胶内胶层，多层交替方 超高强钢丝缠绕层和一层耐天侯的合成橡 胶层组成 ICATIONS:This section covers hose for use with 9um base hydraulic fluids within a temperature of-40°C-+121°C (-40°F〜+250°F) >TRUCTION:This hose shall consist of an inner )f oil resistant synthetic rubber, multiple spiral plies ivy steel wire wrapped in alternating directions, and and weather resistant synthetic rubber cover.

钢丝缠绕橡胶软管 WIRE SPIRAL HYDRAULIC RUBBER HOSE 用途： 适用于使用石油基液压油，温度范围-40-C-+100°C (-40°F~+212°F)的软管。 特性： 软管由一层氯丁橡胶内胶层、4层高强度钢 丝缠绕层和一层耐油、耐天候合成橡胶外胶层组 成。软管执行EN856-4SH标准.GB/T10544-2003标准。 APPLICATIONS:This section covers hose for use with petroleum base hydraulic fluids within a temperature range of -40°C 〜+100°C (-40°F~+212°F). FEATURE: This hose shall consist of a CR inner tube of oil resistant synthetic rubber, four plies of steel wire wrapped in alternating directions and an oil and weather resista nt synthetic rubber cover. The hose is made in conformity with EN856-4SH. and GB/T10544-2013.

GL691 氐温钢丝编织液压橡胶软管 ER LOW TEMPERATURE RESISTANT WIRE BRAID [RAULIC RUBBER HOSE 于超低温下使用的石油基液压油，温度使用范 龊-100匕 由耐超低温性特好的，具有良好耐油性的特种 橡胶内胶，钢丝编织增强层，耐超低温性特好 具有良好耐天候性的特种复合橡胶外胶组成。 .ICATIONS: For delivery of petroleum base tulic oil within a temperature range of -55t；-1 OOt； URE: This hose consist of an innertube made of jmperature resistant and oil resistant special )r compound, a wire braid reinforcement and a cover made of low temperature resistant and oil tant special rubber compound.

GL689 SAE 100R19 紧凑型28Mpa最大工作压力4和2层钢丝增强橡胶软管 COMPACT ONE/TWO WIRE BRAIDS REINFORCED HYDRAULIC RUBBER HOSE(MAX. WORKING PRESSURE: 28MPA) 结构： 软管由一层耐油合成橡胶内胶层、按软管设计1或 2层编织层)的钢丝增强和一层耐油和耐天候的合成 橡胶外胶层组成。 应用： 适用于使用石油基液压油，温度范围为-40°C~ +100°C(-40°F~+212°F)的软管。 CONSTRUCTION： This hose shall consist of " inner tube of oil resistant synthetic rubber, a steel wire braid reinforcement (one or two braids, according to hose desig n), and an oil and weather resista nt synthetic rubber cover A ply or braid of suitable material may be used over the inner tube and / or over the wire reinforcement to anchor the synthetic rubber onto the wire. APPLICATIONS： This section covers hose for use with petroleum base hydraulic fluids within a temperature range of-40°C 〜+100°C(-40°F~+212°F).

GL688 SAE 100R17 奏型21 Mpm最大工作压力1和2层钢丝增强橡胶软管 MPACT ONE/TWO WIRE BRAIDS REINFORCED HYDRAULIC BBER HOSE(MAX. WORKING PRESSURE: 21 MPA) 当构： l管由一层耐油合成橡胶内胶层、按软管设计1或 昙编织层)的钢丝增强和一层耐油和耐天候的合成 2胶外胶层组成。 Z用： i用于使用石油基液压油，温度范围为-40°C~ 1 oo°c (-40°F ~+212°F)的软管。 ISTRUCTION： This hose shall consist of an inner > of oil resistant synthetic rubber steel wire braid forcement according to hose design(one or two ds), and an oil and weather resistant synthetic )er cover A ply or braid of suitable material may used over the inner tube and / or over the wire forcement to anchor the synthetic rubber to the a LICATIONS： This section covers hose for use with oleum base hydraulic fluids within a temperature je of-40°C ~ + 100°C(-40°F〜+212°F).

GL687 SAE 100R16 紧凑型高压1和2层钢丝缠绕增强橡胶软管 紧; COMPACT HIGH PRESSURE, ONE/TWO STEEL WIRE BRAIDS REINFORCED HYDRAULIC RUBBER HOSE CO RUI 结构： 软管由一层耐油合成橡胶内胶层，按软管设计(1或 2层编织)的钢丝増强层和一层耐天候合成橡胶外胶 层组成。 应用： 适用于使用石油基液压油，温度范围一409〜+1219 (-40°F 〜+250°F)软管。 2J CONSTRUCTION： This hose shall consist of an inner tube of oil resistant synthetic rubber, one or two steel wire braids reinforcement, and an oil and weather resista nt synthetic rubber cover, a ply or braid of suitable material may be used over the inner tube and / or over the wire reinforcement to anchor the synthetic rubber to the wire. APPLICATIONS： This section covers hose for use with petroleum base hydraulic fluids within a temperature range of -4(Tc 〜+121・c(-40°F 〜+250°F).

GL881高压污水清洗喷射软管 HIGH PRESSURE SEWER JETTING RUBBER HOSE 用途： 适用于高压清洗和清洗污水处理系统。 内胶层采用特殊优质橡胶，和两层织物编织，夕卜胶层采用耐磨，耐油和耐气候的特殊合成橡胶 制成 Applications:For high pressure water cleaning and rinsing of sewage systems. Feature: The inner tube is made of excellent abrasion, oil and weather resistant special synthetic rubber with high tensile synthetic textile braided reinforcement.

汽车空调管系列（四层管、五层管） AUTOMOTIVE A/C HOSE SERIES 用途： 适用于输送冷媒R134a的各型号汽车空调用橡胶管 特性： 采用耐天候良好的特种橡胶制造，并采用耐超低冷 媒渗透性能和低湿渗透性能的尼龙阻隔材料作为隔 离层，外观为黑色光面橡胶管。执行QC/T664-2000 标准，不仅仅满足国内外各大汽车制造厂商的标准要 求，而且更能体现着利通公司对改善人类生存环境的 关注和不懈努力 APPLICATIONS: Rubber tubes for various types of automobile air conditioner suitable for conveying refrigerant R134a FEATURE:This hose is made of special weather resistant rubber compound, Isolation layer is made of nylon barrier material resistant to low refrigerant permeation and low moisture permeability. Hose surface is black smooth. Hose quality subject to QC/T 664-2000 standard, not only meeting the standard requirement of big domestic and foreign automobile manufacturers, but also to embody Letone's attention and unremitting efforts to improve the living environment of mankind.

ND BLASTLNG HOSE 对金属体表面风压喷砂除锈用。 生： i层采用耐磨性能优良的橡胶制造，耐压性能好。 DAFIONS： For sand blasting and eliminating rust on •face of metal body. RE： The inner tube is made of excellent abrasion nt rubber with good pressure resistance.

用途: 适用于输送矿物质油，合成脂基油，乳化油和水的低压 回油管。 特性： 软管由一层耐油合成橡胶的内胶层，1-2层抗拉纤维编织 增强层和一层耐油耐天侯的合成橡胶外胶层组成。

胶管总成

胶管接头

美制SAE螺纹O形圈 密封 SAE O-RING MALE H F 11 美制锥螺纹 NPT MALE 16011-RW P95 fa: p 15611-RW P96 英管螺纹球面密封 BSP FEMALE MULTISEAL eSzzp 22111-RW P97 22141-RW P98 22191-RW P99 美制JIC螺纹74。锥 密封 JIC 74° CONE —nztimmi — 16711-RW P100 26711-RW P101 26741-RW P102 佶 26791- RW P103 26711D-RW P104 徒 26711D-SMRV P104 f3 1 26791K-RW P105 美制SAE螺纹90。锥 密封 SAE 90° CONE SEAT 唤卩 17811-RW P105 27811-RW P105 27841-RW P106 严 27891-RW P106 美制ORFS螺纹平而 密封 ORFS FLAT SEAT ^TTTl. ba P 14211-RW P106 亦一p 24211-RW P107 严 24241-RW P108 24291-RW P109 美制NPSM螺纹60。 锥面密封 NPSM FEMALE 60° CONE SEAT 21611-RW P110 21641-RW P110 产 21691-RW P111 SAE 法兰式3000PSI 轻系列 SAE FLANGE L.T. 87311-RW P111 87341-RW P112 87391-RW P112 SAE 法兰式6000PSI 重系列 SAE FLANGE S.T. 已 87611-RW P113 87641-RW P113 产 87691-RW P114 日制法兰 JIS FLANGE 88111-RW P115 88141-RW P115 产 88191-RW P115 日式公制螺纹60。锥 密封 JIS METRIC 60° CONE SEAT 啦i—p 18611-RW P116 28611-RW P116 28641-RW P117 F 28691-RW P117 日式英管螺纹60。锥 密封 JIS BSPP 60° CONE SEAT 29611-RW P118 29641-RW P119 F 29691-RW P119

扣压设备